Almost all of the mechanical equipment are equipped with bearings, in order to meet different uses and use requirements, bearings in continuous development and progress.
1.Deep groove ball bearing
The most widely used bearing.
2.Angular contact ball bearing
A certain contact angle is formed between the rolling element and the inner and outer rings, which can bear both radial and axial loads.
3. Thrust ball bearing
Strong axial bearing capacity, suitable for bearing heavy load.
4. Cylindrical roller bearing
The rolling element is “cylindrical roller”.
5. Cylindrical roller bearing
This is also a “cylindrical roller” bearing, but compared with the bearing in “4”, the shape of cage is different.
6. Tapered roller bearing
The rolling element is “tapered roller”, that is, the diameter of one end of the roller is small, which can bear both radial and axial loads.
7. Spherical Roller Bearings
This kind of bearing has the function of adjusting the small eccentricity between the inner and outer rings during operation.
8. Thrust needle roller bearing
In order to keep the car comfortable, air conditioning is essential, which is the bearing used by air conditioning compressor.
9. Needle & amp; cage as
One of the types of bearings used in automobile manual transmission. Good durability is required.
