HV – stainless steel bearing parts, non-toxic (food grade) grease
VA201 – bearing with stamped steel cage, suitable for high temperature applications
VA228 – bearing with Coronet graphite cage, suitable for temperatures from -150 to +350 °C
VE495 – Inner and outer ring zinc plated and stainless steel oil throw ring, non-toxic (food grade) grease
VL065 – zinc-plated inner ring bores and side surfaces
VT357 – bearing filled with high quality mineral oil based grease made of lithium-compound soap
Standard bearings – standard Superagriseal contact seals on both sides of the bearing
Bearings with square and hexagonal bores – three-lip seals on both sides of the bearing
2F – standard contact seals with additional plain oil retaining ring on both sides of the bearing
2LS8 – steel-reinforced synthetic rubber contact seals on both sides of the bearing
2RF – standard contact seals with additional rubber lip oil retaining ring on both sides of the bearing
2RS1 – steel plate reinforced NBR contact seals on both sides of the bearing
VP076–Both sides of the bearing for the stamping steel dust cover
C – cylindrical outer diameter
K – tapered hole, taper 1:12
U–bearing without eccentric locking ring
W–bearing outer ring without lubrication hole
W64–Solid oil bearings
GS – thrust cylindrical roller, thrust needle roller bearing seat ring. Example: GS81107 – thrust cylindrical roller bearing 81107 seat ring.
K – thrust roller and cage in the combination of parts. Example: K81170.
K – in line with AFBMA standard series of inch tapered roller bearings with rollers and cage assembly in the inner ring (inner taper) or outer ring (taper ring). Example: K-09067 – series for 09000 tapered roller bearings with inner taper.
L – single inner ring or outer ring of separating type bearing. Example: LNU207 – cylindrical roller bearing NU207 inner ring.
Single row angular contact ball bearings
ACD—contact angle of 25 degrees.
B—Contact angle is 40 degrees.
CC—Contact angle is 12 degrees.
CAC, ECAC, CA, ECA – These are designed for large size bearings with symmetrical rollers. The inner ring has fixed retaining edges on both sides, and the movable center retaining ring is guided by the inner ring. The cage is integral brass or steel solid frame.CAC and ECAC type bearing roller and raceway surface is optimized machining, help roller guidance, and can reduce friction.ECAC type with reinforced rollers to improve the load capacity.
-2F–Outside spherical ball bearings with dust throwing retaining ring on both sides.
-2FF–Outside spherical ball bearing with combined dust throwing retaining ring on both sides.
G–Universal paired single row angular contact ball bearings. When face to face or back to back arrangement, there is a certain preload inside the bearing before installation.
GA – face to face, back to back arrangement, there is a light preload inside the bearing.
GB – face to face, back to back arrangement, there is a medium preload in the bearing.
GC – face to face, back to back arrangement, there is a heavy preload in the bearing.
K – tapered hole, taper 1:12.
K30 – tapered hole, taper 1: 30.
WanYu Bearing Co., Ltd. is a bearing factory with more than 100,000 kinds of bearings, if you have a bearing problem you want to consult please contact us in time, we will provide you with fast service!
Tel: +86 15969613555
Email:wanyu@sdwybearing.com
www.wanyubearings.com
