FAG deep groove ball bearings are universal, self-retaining bearings with a solid outer ring, inner ring and ball and cage assembly. They are simple in design, long-lasting and easy to maintain; they are available in single-row and double-row designs and open and sealed designs. Due to the production technology used, open bearings can still be turned into recesses on the outer ring for sealing or protection. Due to their low frictional torque, they are suitable for high speeds.
Single row angular contact ball bearings are self-retaining units with solid inner and outer rings, as well as ball and nylon, steel or brass cage assemblies. Inner and outer ring raceways are offset from each other in the axial direction of the bearing. There are open and sealed bearings. They have little self-aligning capability.
Single row cylindrical roller bearings with cage are a set of assemblies including integral inner and outer rings, cylindrical rollers and cage assemblies. The outer ring has rigid retaining edges or no retaining edges on both sides, and the inner ring has one or two rigid retaining edges, or no designed retaining edges. The cage prevents the cylindrical rollers from contacting each other when rolling.
Full complement cylindrical roller bearings have integral inner and outer rings and retaining edge-guided cylindrical rollers. Due to the maximum number of rolling elements, these bearings have an extremely high centripetal load carrying capacity, high rigidity and are suitable for particularly compact designs. Due to kinematic conditions, they cannot achieve the high speeds possible with cylindrical roller bearings with cages.
Tapered roller bearings consist of solid outer and inner rings with tapered groove plates and tapered rollers with cages. The bearing is not self-retaining. Therefore the inner ring with rollers and cage can be separated from the outer ring. Tapered roller bearings can support axial loads originating in the same direction as well as high radial loads. They usually have to be axially adjusted in a mirror image arrangement to match the second bearing.
Aviation engineering, metal cutting machine tools, steel processing equipment, converters, casting equipment, rolling mills, mechanical transmission equipment, paper machinery, cement machinery, mills, mining machinery, engineering machinery and vibration machinery, environmental protection equipment, wind power generation equipment, ships, antennas and radar, textile machinery, packaging machinery, etc.
